Quick guide for tbs6909_v6
www.tbsdtv.com
Normal mode:(Mode 1)
If you want to use normally way with TBS6909, you need to change the mode to normal mode, one input for
two tuners, every port you can choose the satellite you want with Diseqc command, the two tuners use the
same satellite signal and polarization. In this mode, you don't need to distinguish VL, VH, HL, HH signal, no
matter it's a ku or C-band satellite signal, just scan it.
like this:
create text file "/etc/modprobe.d/mxl5xx.conf" with line:
options mxl5xx mode=1
after created this file, restart your PC to load the new configuration.
Both of mode 0 and mode 1 support Diseqc and multiswitch. It's necessary to use a diseqc or multiswitch
when you want to use two or more satellites and many inputs needed at the same time. The following
explainaions will tell you how to deal with this when you use dvblast, tvheadend or Astar to receive and
stream.
The most commonly used Diseqc is a 4-port or 8-port diseqc, and multiswitch is 2-satellite or 4-satellite.
