22
12.0 VIDEO SETUP
TV Standard:
Select the output TV video format (NTSC / PAL).
NTSC Active Output:
- Select the output mode. (HDMI/ SD Video/ VGA/ HD Y.Pb.Pr)
- You can also press directly the “TV MODE” button on the remote
control to select output mode.
Aspecl-ratio:
Select TV mode 4:3 or 16:9.
HDMI:
Select the HDMI output resolution among 480i / 480p/ 720p / 1080i/ 1080p.
Select the “Auto EDID”, the MPL027P will scan the display device connected and set the
correct resolution automatically.
SD Video:
Select the SD output mode. (“Video/ S-Video” or “Y.Cb.Cr”)
VGA 60Hz:
Select the VGA output resolution.
(640*480 / 800*600/ 1024*768/ 1280*1024/ 1360*768)
HD Y.Pb.Pr 60Hz:
Select the Y.Pb.Pr output resolution among 480p / 720p / 1080i.
12.1 OTHER SETUP
Play OSD Display:
Enable or disable the OSD display.
Auto Play
-
Movies: Auto play movie files on the CF card after power on.
- Pictures: Auto play picture files on the CF card after power on (slideshow function).
- MultiLayer: Directly execute Multiple Display function after power on.
- Off: Turn off the Auto Play function.
SlideShow Interval:
Set the time each photo is shown to 10, 15, 30 or 60 seconds.
Lock Remote Controller:
Enable/ disable the auto key lock function. (The MPL027P will auto lock
when there is no further input for 1 minute.)
