22
OSD Menu Instructions
> AREA SEL. (AREA1~8): Choose one of 8 colored boxes to adjust its size or location.
> AREA STATE (ON,OFF): Select a box active or inactive for privacy masking.
> HIGHT, WIDTH: Adjust the height or width of the area.
> LEFT/RIGHT, TOP/BOTTOM: Changes the location of the defined area.
> COLOR (1~15): Choose one of 15 colors for the masked area.
> VIEW (ON, OFF): Turns the
“Running Man” indication On or Off.
> RETURN: Select RET to save and exit, and to go back to the MAIN MENU.
●
DPC (Dead Pixel Compensation)
This function is used to compensate for the dead pixel areas of the screen. When a
defective pixel is detected, a neighboring pixel information is used to determine the
approximate pixel data and is replaced. The DPC is capable of compensating up to 64
points of dead pixels.
●
VERSION
The camera firmware version is displayed.
●
RETURN
Selects
“RET” to save and exit, and to go back to the MAIN MENU.
RESET
This function is used to reset all camera settings to the factory default settings.
EXIT
Choose EXIT to save and exit from the menu mode.
