13
OSD Menu Instructions
3. Menu Setup
1) Press the SETUP key to access the menu mode.
2) Select the desired feature by using UP/DOWN keys on the control part.
CAMERA SET
: Configure Camera related functions and data.
CAMERA ID: OFF/ON
This menu is used for you to assign a unique name to a camera. You can enter up to
54 alphanumeric or special characters for the CAMERA ID.
Select LOCATION and press the SETUP key to move the display position of the
CAMERA ID
IRIS: ALC/ELC
This menu is used if you want to adjust the intensity of radiation incoming to the
camera.
z
ALC (Automatic Light Control):
If you press the SETUP key with an ALC based submenu selected, you will see LENS,
LEVEL, BACKLIGHT options on your screen.
☞
In the LENS option, you must select DC for this camera model.
14
OSD Menu Instructions
In the LEVEL option, you can adjust the overall brightness where “+”will increase the
brightness and “-“will decrease it.
In the BACKLIGHT option, you can adjust the BLC(Back Light Compensation) function
to improve the sharpness of the image in a high contrast scene.
If you set the BACKLIGHT option to WDR*, you can adjust the shutter speed in WDR
LEVEL and the bright ness in WEIGHT.
You can also select either OUTDOOR or INDOOR in WHITE BAL. WDR(Wide
Dynamic Range)* extends the gain range of the screen that is mostly useful If camera
takes a simultaneous picture of both indoor and outside nearby window.
Namely, it improves the sharpness of the picture in outdoor scenery as well as indoor.
(*)WDR function is optional.
z
ELC(Electronic Light Control):
You can make the ELC function active or not.
It is similar to ALC setting, you can specify the BLC area.
MOTION: S.SLOW/SLOW/NORM/FAST/F.FAST
Adjust the strength of the AGC level for a control of the camera motion. To monitor fast
moving objects in a low contrast scene, select F.FAST while select S.SLOW for hardly
moving objects in the same lighting condition.
☞
NOTE:
-
This is available only if the SENS-UP menu is set to AUTO.
-
If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the MOTION
menu will be deactivated.
