20
TBK Vision Plus Network Camera User Manual
4.4.4
Alarm Input Trigger
1. Enter “Alarm Configuration”
“Alarm Input Trigger” to see a screen as shown below:
2. Select the sensor at the “Sensor” pull down list and set the sensor name and alarm type: NO
and NC.
3. Enable alarm and select alarm holding time.
4. Set alarm trigger options. The setting steps are the same as that of motion detection trigger.
Please refer to motion detection trigger chapter for details.
5. Apply settings to all by clicking “Copy” button to quickly set the same settings for all
sensors.
4.4.5
Alarm Input Schedule
Go to “Alarm Configuration”
“Alarm Input Schedule” as shown below:
Summary of Contents for BUL7436EIR
Page 3: ......
