64
(
1
)确认交流输出线缆、地线、通信线等连接正确并安装牢靠。
(
2
)确认没有工具以及其他杂物遗留在逆变器内部。
(
3
)关闭前门板并安装好门板上的螺丝,紧固力矩为
6 N
·
m
。
(
4
)清理现场。
(
1
)
Confirm that the
AC
output cable, grounding wire and
communication cable are connected correctly and installed firmly
(
2
)
Confirm that no tools and others are left inside the inverter.
(
3
)
Close the front door panel and install the screws on the door
panel. The tightening torque is 6N·m.
(
4
)
Clean up the site.
4.2.7
通讯地址设置
Setup of communication address
⚫
通信地址设置
Setup of communication address
1
)
APP
设置方式
Set up by APP
手机
APP
连接该逆变器的热点,选择”更多
---
通讯参数
---
设备地
址”
,设置页面如图
4-24
所示。修改逆变器的通讯地址(
1-247
)
,必须
保证在方阵内唯一,修改后立即生效。
Connect the hotspot of the inverter through mobile
APP
, select
“more-- communication parameters—device address,” the setting
interface is as shown in figure 4-24. Modify the communication address
(1-247), guaranteed to be unique within the arrays, effective immediately
after amendment