NEMO series battery to battery Charger
10
Model
Recommended wiring
1m
2m
5m
10m
DX1230, DDX1230,IDX1230,
IDDX1230
6mm
2
or
AWG9
10mm
2
or
AWG7
16mm
2
or
AWG5
25mm
2
or
AWG3
DX1215, IDX1215, DX2415, DDX2415,
IDX2415, IDDX2415, DX2415L,
DDX2415L, IDX2415L, IDDX2415L
4mm
2
or
AWG11
6mm
2
or
AWG9
10mm
2
or
AWG7
16mm
2
or
AWG5
5. Installation and Connection
For the user’s operation safety, cut off the power before installation.
Please double check the battery voltage matching the model installed.
5.1 General advice
Select a suitable place to install the battery to battery charger, ensuring adequate ventilation
to the charger’s metal body, free from excessive heat and vibration. The electronics are
enclosed in a sealed housing. However, the charger is NOT designed to be installed in a
location where water might short between terminals.
All cables installed must be fused. The fuse should be installed as close as possible to
the power source (battery).
Connections from the battery must be fused closed to the battery.
Use M5 screws to secure the charger in a solid surface.
5.2 Connecting the power cable
Please ensure the correct polarity when connecting. Reverse polarity will
burn the fuse or damage the charger and void warranty.
