eRay Pure Sine Wave Inverter Manual
15
6. Operation
6.1 Double Checking
Check the DC input voltage of this inverter is same to your battery nominal voltage. NEVER try
to connect different DC input to inverter.
Inspect the right polarity of DC on service battery; otherwise the unit cannot be powered ON.
Please check if you connect the Negative terminal of starter battery to the DC – terminal of
inverter.
Inspect AC output is correct; make sure unit is no short circuit.
6.2 Inverter operation
Press shortly the ON/OFF switch on the front panel to turn the inverter power on. After that the “INV”
and “BATTERY” LED indicators are illuminated, and then the inverter is ready to deliver AC power
to the loads.
The ON/OFF switch, dry contact input and optional remote control works independently. It means if
you use one group switch to power on the inverter, you can only use the same group to power off.
6.3 LED indicator status
Figure 6-1 LED indicator of IH2000/IH1500
Figure 6-2 LED indicator of IH1000/IH700
