Apollo Maxx User Manual
12
The equipment will automatically shut down when the AC output is shorted and needs to be
manually activated.
Battery over Temperature Protection
During the charging, the equipment will continuously monitor the battery temperature. When the
battery temperature is too high, the equipment will automatically reduce the charging current.
When the battery is severely heated, the charger will automatically turn off to protect the battery.
Battery Low Voltage/SOC Protection
To prevent the permanent damage caused by the over discharge of battery, the equipment will
automatically cut off the output according to the low voltage/SOC protection point set by the user.
2.3.10 Communication
Dry Contact Input
Apollo Maxx is equipped with two dry contact inputs for remote on/off and EPO control.
Dry Contact Output
Apollo Maxx is equipped with two NO/NC relay type dry contact outputs. The user can set specific
functions through the LCD. Following is the default setting.
Relay1: The relay is closed when the battery is under voltage.
Relya2: The relay is closed when a fault or a overload occurs.
RS485
Equipped with two RS485 interfaces.
CAN
Equipped with a CAN interface.
Summary of Contents for APOLLO MAXX Series
Page 1: ......
Page 36: ...Apollo Maxx User Manual 32...
