TBB power M12-400 User Manual Download Page 3

                 

    M12-400 Lithium Battery Module User Manual 

 

 

Preface 

The M12 series lithium iron phosphate battery system is a standard and high performance lithium 

battery  system. It supports  parallel connection.  It has obvious advantages in terms of safety, 

energy density, service life, and environmental protection. With an intelligent battery management 

system, it provides customers with a safe and stable one-stop power supply guarantee service. 

This user manual introduces in details of product structure, parameters, basic procedures and 

methods of installation, as well as operation and maintenance of product. 

Please follow below request during the procedure of installation, operation and maintenance: 

  Please connect wires properly while installation, do not reverse connect. To avoid short 

circuit, please do not connect positive and negative poles with conductor(Wires for 

instance). 

  For your safety, product shall be ground connected properly before normal use. 

  Please do not mixed-use batteries from different manufacturers, different types  or   

models, neither nor old and new together. 

  The  M series lithium batteries support parallel connection, but series connection is 

prohibited. 

  Please ensure that the electrical parameters of the related equipments are compatible 

with each other before use. 

  For long-term storage, the battery should be recharged once at least in every 3 months, 

it needs to be charged to 80% capacity regularly. 

  For your safety, please do not arbitrarily dismantle any components  in any 

circumstances  unless a specialist or an authorized one from TBB  Power.  Device 

breakdown due to improper operation will not be covered under warranty 

The product has been strictly inspected before shipment. If you find abnormal 

phenomena such as swelling of the shell, please contact the sales or TBB Power. 

The use environment and storage method have a certain impact on the service 

life and reliability of this product, so environmental factors must be fully 

considered before installation and use to ensure that the system works in a 

suitable environment. 

Disclaimer: Due to the continuous update and improvement of products and technologies, 

the  content in this document may not completely match the actual product, please 

understand. For product updates, please contact your sales or TBB Power. 

 

 

Summary of Contents for M12-400





























Reviews: