- 9 -
First steps to start F-SCAN5
-
Connect the mini usb cable to the device and plug the w all charger into a w all outlet w ith a reading
betw een 100 VAC up to 240 VAC.
-
Touch the ON sw itch on the side.
The screen must show the stand by screen w ith the battery symbol top right flashing yellow .
The inf ormation displayed means:
- SERIAL:
Serial number of device
- ONS:
Number of uses
- Ds
Number of DIRPs
- FLASH ID: identifies the type of internal memory.
FFFFFFFF w ould indicate a memory defect. The device must then be checked by a
prof essional.
- V1.00B0x
Version of softw are active in the device.
The opening screen, as show n above, offers a menu of 5 or 6 options. One has to be selected in or der to
continue the setup of the F-SCA N5 for operation. The menu button EA P is enabled only if the device is
purchased w ith the EAP option.
