Charging
：
●
Plugging
the
charging
cable
to
the
main
player
hole
with
USB
Port
or
5V
1A
USB
adapter
.
LED
Indicator
Cable
Plug
Hole
（
Please
screw
the
cable
tightly
before
diving
)
LED Indicator
Controller LED: Full blue after connection, flash fast for pairing
Power LED: Full red during charging and no led after fully charging
( on the main player)
Problem and solution
Pairing fail: remove Gopro connection and try again
Power on fail: Check if the main player is charged; check if the
cable is well connected and try again.
Button not work: please check if the cable is well connected with
main player.
Matainance
Do
not
pull
the
stick
back
/
forward
strongly
as
the
connection
cable
is
hidden
inside
.
The
stick
will
lose
function
if
cable
is
broken
.
After
usage
,
please
pull
back
the
stick
to
the
short
length
to
keep
the
inside
cable
good
condition
.
Please
disconnect
the
main
player
and
the
controller
if
no
use
.
Please
charge
the
main
player
first
after
long
time
no
use
.
Please screw the connection cable tightly into the main player
before diving, otherwise main player will be broken under water.
WIFI Pair
●
Power
both
GoPro
and
Controller
●
Go
to
GoPro
Setting
,
Connect—Connect
New
Device—Smart
Remote
to
pair
.
Once
connected
,
GoPro
will
show
connected
and
controller
LED
keep
full
blue
.
Operatoin:
1.You can use the controller to control Gopro once connected.
2.Controller can power on/off GoPro
3.Shutter and Mode of the controller works same as GoPro buttons.
Other setting by touch screen need to be done before diving.
Note
:：
1
.
Controller
can
connect
with
only
1
GoPro
2
.
If
pairing
failed
,
please
power
on
again
both
GoPro
and
controller
to
try
again
.
3. Please
reset
connections
of
GoPro
to
connect
the
new
GoPro
.
4.You can adjust the GoPro Adapter, or the main player adapter
to the right position or direction to shoot as you want.
5. Scroll left to pull up or down the stick, scroll right to lock.
LED Indicator
Plug
Hole
