INSTALLATION INSTRUCTIONS
CUSTOMER SERVICE WEST 1-800-267-4774 | EAST 1-800-387-7064 | taymor.com
® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
SI
LI
CO
NE
TURN OFF
TURN OFF
EXPLODED DIAGRAM FOR REFERENCE
MAINTENANCE
Your new faucet is designed for years of trouble-free performance.
Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners,
steel wool and harsh chemicals as these will dull the finish and void your warranty.
NUT
INVERTER
WASHER
HANDLE SEAT
O-RING
HANDLE
INVERTER
WASHER
FLANGE
SLEEVE
WASHER
THIS FAUCET MEETS OR EXCEEDS THE FOLLOWING STANDARDS:
cUPC, ASME A112.18.1
THANK YOU
FOR PURCHASING THIS TAYMOR PRODUCT. ALL TAYMOR PRODUCTS ARE CAREFULLY
ENGINEERED AND FACTORY TESTED TO PROVIDE LONG TROUBLE-FREE USE UNDER NORMAL CONDITIONS.
HAVE BASIC TOOLS READY
RECOMMENDED TOOLS:
Flashlight
Teflon
tape
Screw-
drivers
Adjustable and
Pipe wrench
Plumber’s
putty
Safety
goggles
Torque
wrench
Silicone
caulk
1
TURN OFF THE MAIN WATER SUPPLY
Locate water supply inlets and shut off water supply valves.
WARNING: READ ALL
the instructions completely before beginning.
READ ALL
warnings, care and maintenance information.
Taymor recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and provincial plumbing and building codes.
Need Help?
Please call our toll-free Customer Support line at
(WEST) 1-800-267-4774 (EAST ) 1-800-387-7064 for additional assistance or service.
06-9523SBDT
ASTRAL DIVERTER VALVE TRIM KIT
Recommended valve depth is 1-1/2” min. to
2-1/2” max. from the center of the diverter
to the finished wall as shown.
Hand
drill
5
2
Place the handle on the diverter
.
Adjust handle to make water flow from
“
OUTLET 1
” only position. Remove the
handle.
3
Postion the escutcheon onto the
diverter body with the drain hole at
the bottom. Place the handle onto the
diverter body and make sure the handle
is upright and then tighten the handle
seat .
4
Adjust handle position to control flowing pattern.
FINISHED WALL
1
2
1
2
OUTLET 1
OUTLET 2
OUTLET 3
1
2
OUTLET 1
OUTLET 2
OUTLET 3
1
2
3
3
Water flow from
OUTLET 1
Water flow from
OUTLET 2
Water flow from
OUTLET 3
1-1/4”
(31.1 mm)
1-1/2”
(38 mm)
2-1/2”
(83.5 mm)
-
DIVERTER
VALVE
1-1/4”
(31.1 mm)
PRO/VALVE BODY
1-1/2”
(38 mm)
2-1/2”
(83.5 mm)
-
FINISHED WALL
FINISHED WALL
