102
55
Enter the Heating Program
1) Press the Menu button and then press Set Schedule.
Press SYSTEM button to select either "
Heat
" or "
Cool
" in
the system switch area indicating the active mode being
programmed. You can switch to the other mode by
pressing the system switch at any time.
2) The top of the display will show the day(s) being pro-
grammed. The time and set at temperature are also
displayed. "
Morning
" will also be displayed to indicate
the period.
3) Press
or
key to change the temperature to your
selected temperature for the 1st heating period (Morning).
4) Press
or
key to adjust the start time for period.
The time will change in 15 minute increments.
5) Press
FAN
to select
Auto
or
Prog
.
6) After you have set the time and the temperature for the
period to begin, press Set Schedule to advance to the
next program period.
7) Repeat steps 2 through 6 until all of the program times
and temperatures are set for all program periods on
that day.
8) Press "Advance Day" to change to the next day and
repeat steps 2 through 8.
9) When programming is complete and all of the times and
temperatures match your desired heating schedule, press
Run Schedule. The thermostat will now run your program.
Enter the Cooling Program
1) Press the SYSTEM button until the Cool icon appears.
2) Follow
Enter Heating Program
instructions for entering
cooling times and temperatures.
PROGRAMMING
Fill in the blank schedule on the next page then:
Automatic Schedule
This feature provides a method to program every day with
the most popular time and temperature profile using one key
press. For this feature to be available, the Auto schedule
options (
AS Cool
or
AS Heat
) should be set on in the
installer configuration.
Select the desired Comfort Temperature in the setpoint.
When the
Auto Schedule
touch key is pressed, it will start
flashing indicating that it is now ready to insert the displayed
temperature setpoint as the Comfort Temperature for the
selected system mode currently in (Heat/Cool). A second
press of the
Auto Schedule
touch key will complete the
process. A 6
o
F setback temperature will also be inserted for
the night step. Once it is done, the touch key display
Auto
Schedule
will disappear disabling any further operation of
Auto Schedule
touch key. If desired it can be enabled again
in the installer configuration menu.
Entering Fan Program
The FAN touch key is used to select
FAN Auto
operation
(fan energized with a call for cool but not on with a call for
heat) to
FAN On
(fan on continuous) or
FAN PROG
(fan
programmed to cycle fixed time automatically). Each press of
the FAN touch key will change the mode from
Auto
to
On
to
Prog
.
FAN Auto
or
FAN On
or
FAN On Prog
will display in
the run mode for as long as the fan is in that position. When
FAN Prog
position is selected and the system is in the
Cool,
Heat
or
Auto
mode, the circulator blower (fan) will cycle ON
for 10 minutes, OFF for 20 minutes when the thermostat has
not called for cooling or heating for the past 60 minutes.
To improve indoor air quality, the system circulator can be
programmed to run during any program time period by
touching the FAN touch key in the appropriate program time
period when in the
Menu
mode for that particular day.
The display shall indicate
Prog
(under the FAN icon) when in
Menu mode and the fan is programmed to come on during
that time.
In the menu mode, each time the fan key is pressed, the fan
operation and display will change from
FAN Auto
to
FAN
Prog
. The display shall indicate
FAN On Prog
when in run
mode and the fan is programmed to run for that particular
time period.
When in
Run Schedule
mode and the FAN touch key is
pressed, it will override the schedule, and the display and fan
operation shall change to
FAN Auto
and the fan is stopped.
Further key depression will change it to
FAN On
(continuous
blower on) and to
FAN Prog
(cycling 10 minutes on and 20
minutes off if there is no call for heat or cool for 60 minutes).
The
Run Schedule
touch key will also be indicated, meaning
that it is an override on the scheduled program. The override
will last until next schedule comes up or the
Run Schedule
touch key is depressed.
Programming Tip: Copy Button
You may copy any daily program to another day or group of
days by pressing the Copy button. In 7 day programming
mode when the Copy button is pressed, the other 6 days of
the week will flash. To copy the current program into the
remaining six days, simply press the Copy button again. To
copy the current program to another day of the week, press
Advance Day to select the day and press Copy to paste the
program. In 5/1/1 day programming mode the copy function
is similar. The weekday (Mon-Fri) program can be copied to
Sat and Sun (both flashing) or use Advance Day to choose
Sat or Sun and press the Copy button to paste the program.
Automatic Daylight Saving Calculation
The Real Time Clock will adjust automatically for daylight
savings time, in the following manner until 2007:
Increment one hour at 2 AM on the first Sunday of April and
decrement one hour at 2 AM of the last Sunday of October
every year.
From March 2007, the adjustment will occur every year as
follows: Increment one hour at 2 AM on the second Sunday
of March and decrement one hour at 2 AM on the first
Sunday of November.
The daylight saving feature can be enabled or disabled in
installer configuration mode.
After entering installer configuration mode, momentarily
press
or
touch key until the display indicates dS (in
actual temperature digits) and on (default in c lock digits).
and
keys will toggle display and operation from On to
OFF.
