V
-
21A
14
WELDING
-
ALL MODELS
Ensuring that a stud has been loaded, position
the stud at the location on the work piece where
it is to be welded. Press down firmly on the
pistol until the ferrule (or the face of the nose
cone if using instead) is firmly in contact with the
work piece. Do not drape or wrap the pistol
cables over or around yourself whilst operating
the equipment. Allow the cables to trail naturally
to the floor.
Press the trigger.
Once welding has taken place. Draw the pistol off the
welded stud. Always lift the welding pistol vertically
from the welded stud. Failure to do this may cause
damage to the chuck, which will result in the chuck
and stud arcing together during subsequent welds
and thereby reducing the working life of the chuck.
