Taylor C723, Operator'S Manual

Page: 30 / 56

5-8
USER INTERFACE
Model C723
User Interface
5
Pressing the SEL symbol with the arrow next to the
appropriate month will display the following screen.

(See Figure 5-21.)
Figure 5-21
Pressing the Up or Down symbol will move the arrow to
the appropriate week for the start of DST. Pressing the
SEL symbol next to the appropriate week will display the
following screen. Press the Up or Down symbol to move
the arrow to the appropriate month for the end of DST.
(See Figure 5-22.)
Figure 5-22
Pressing the SEL symbol next to the appropriate month
will display the following screen. Press the Up or Down
symbol to move the arrow to the appropriate week for the
end of DST. (See Figure 5-23.)
Figure 5-23
Pressing the SEL symbol with the arrow by the
appropriate week will select that setting and return to the
Manager's Menu.
The AUTO START TIME option allows the manager to
set the time of day at which the machine automatically
enters the Auto mode from the Standby mode. The
machine must be in the Standby mode to Auto start at the
programmable time. The AUTO START TIME can also
be disabled and requires starting the Auto mode
manually. (See Figure 5-24.)
Figure 5-24
Enable the AUTO START TIME by selecting the Up
arrow to move it to “Enable.” Press the SEL symbol to
advance to the next screen.

(See Figure 5-25.)
Figure 5-25
Program the AUTO START TIME by selecting the Up
arrow to move it to “Change.” Press the SEL symbol to
advance to the next screen.

(See Figure 5-26.)
Figure 5-26
Use the arrows to program the AUTO START TIME by
increasing or decreasing the hour setting above the
cursor. Press the SEL symbol to advance the cursor and
program the minutes setting. Select the SEL symbol to
return to the previous screen with the new time setting
displayed. Select the SEL symbol to exit the screen and
return to the Manager's Menu.
The Standby option is used to manually place either side
of the machine in the Standby mode during long no draw
periods. Select the Standby screen from the menu. Press
the SEL symbol to activate Standby.
DST START WEEK
> Second Sunday
Third Sunday
Fourth Sunday
DST END MONTH
> NOV
DEC
DST END WEEK
> First Sunday
Second Sunday
Third Sunday
AUTO START TIME
DISABLED
Enable
> Disable
AUTO START TIME
00:00
Change
> Exit
AUTO START TIME
00:00