Taylor C612, Operator'S Manual

Page: 24 / 62

5-2
USER INTERFACE
Model C612
User Interface
5
Control Panel
Symbol Definitions
To better communicate in the international arena,
symbols have replaced words on many of our operator
switches, function, and fault indicators. Your Taylor
machine is designed with these international symbols.
The following chart identifies the symbol definitions.
= Select
=
ON
= OFF
= Up Arrow
= Down Arrow
= Auto
= Wash
= MIX LOW
= MIX OUT
= Menu Display
= Mix Pump
= Standby
Power Switch
When placed in the ON position, the power switch allows
control panel operation.
Fluorescent Display
The fluorescent display is on the front control panel.
During normal operation the display is blank. The display
is used to show menu options and notifies the operator if
a fault is detected. On international models, the display
will indicate the temperature of the mix in the hopper.
Indicator Lights
MIX LOW— When the MIX LOW symbol is
illuminated, the mix hopper has a low supply of mix and
should be refilled as soon as possible.
MIX OUT— When the MIX OUT symbol is
illuminated, the mix hopper has been almost completely
exhausted and has an insufficient supply of mix to
operate the freezer. At this time, the Auto mode is locked
out and the freezer will be placed in the Standby mode.
To initiate the refrigeration system, add mix to the mix
hopper and press the Auto symbol . The freezer will
automatically begin operation.
Standby Symbol
During long no sale periods, the machine can be placed
in the Standby mode. This maintains product
temperatures below 40°F (4.4°C) in both the hopper and
the freezing cylinder, and helps prevent overbeating and
product breakdown.
When Standby is selected, the Standby symbol
illuminates, indicating the Standby feature has been
activated.
To resume normal operation, press the Auto

symbol . When the machine cycles off, the product
in the freezing cylinder will be at serving viscosity.