5. Empty the pulp container and the juice container when full (this will probably occur at the
same time) before continuing to process more food. Be sure to switch to the OFF position
and wait until the motor stops before attempting to open the unit and empty the
containers.
6. You can make juice from different fruit and vegetables without having to clean your juice
extractor, as flavors are not transferred from use to use.
CLEANING AND MAINTENANCE
After each use and before cleaning, unplug the appliance from outlet and allow the unit to stop.
DO NOT ATTEMPT TO CLEAN WHILE THE MOTOR IS RUNNING OR THE COMPONENTS
ARE STILL MOVING.
CAUTION: NEVER IMMERSE THE BASE UNIT, CORD OR PLUG IN WATER
1. Open the safety locks by flipping them up and out.
2. Remove plunger, protective cover, pulp container and grater/filter basket and clean under
clear running water. A mild dish detergent may be used as well. If using detergent, be
sure to rinse and dry thoroughly.
3. Remove the separating unit and then pull the grater/filter upwards. If you have problems
removing small particles from the grater/filter basket, a small soft brush will remove
remaining particles (i.e. toothbrush, vegetable brush or dish brush).
4. Dry all parts thoroughly.
5. To facilitate easier cleaning, rinse the grater/filter basket (4) immediately after use.
6.
NEVER WASH THE BASE MOTOR UNIT.
To clean the base, wipe clean with a damp
sponge and dry immediately.
7. Never use excess water, treated cloths, harsh cleaning agents, or sprays.
8. Reassemble all parts and store in a dry place.
TAYLOR RECOMMENDS YOU READ THE INSTRUCTION
MANUAL IN FULL BEFORE USING THIS ELECTRICAL
APPLIANCE TO PREVENT INJURY TO YOURSELF OR DAMAGE
TO THE APPLIANCE.
