Section 2
2-1
Model 810, 812, 820, 822, 828 Series
To the Operator
2
To the Operator
The Taylor grills included in this manual consist of the
base model numbers 810, 812, 820, 822, and 828.
Prefix letters were added to the base model numbers to
denote minor design differences:
L = Platen Length 21 in. (533 mm)
G = Grooved Option
Models 810 and 812 are 36 in. (914 mm) grills.
Model 810 has three upper platens, and
Model 812 has two upper platens.
Models 820 and 822 are 24 in. (610 mm) grills.
Model 820 has two upper platens and
Model 822 has one upper platen.
Model 828 is a 12 in. (305 mm) grill with one upper
platen.
These grills can cook a variety of products and feature
two cooking options. They provide all the features of a
flat grill as well as the advantages of two-sided cooking.
The grill you have purchased has been carefully
engineered and manufactured to provide dependable
operation. When properly operated and maintained, it will
produce a consistent quality product. Like all mechanical
products, it will require cleaning and maintenance. A
minimum amount of care and attention is necessary if the
operating procedures in this manual are followed closely.
IMPORTANT!
This Operator's Manual should
be read before operating or performing any maintenance
on your equipment
.
It is strongly recommended that all personnel responsible
for the equipment's operation and cleaning review these
procedures for proper training so no misunderstandings
exist.
If you should technical assistance, please contact your
local authorized Taylor distributor.
Note:
Your Taylor warranty is valid only if the parts are
authorized Taylor parts, purchased from the local
authorized Taylor distributor, and only if all required
service work is provided by an authorized Taylor service
technician. Taylor reserves the right to deny warranty
claims on units or parts if unapproved parts or incorrect
refrigerant were installed in the unit, system modifications
were performed beyond factory recommendations, or it is
determined that the failure was caused by abuse,
misuse, neglect, or failure to follow all operating
instructions. For full details of your Taylor warranty,
please see the Limited Warranty section in this manual.
Note:
Constant research results in steady
improvements; therefore, information in this manual is
subject to change without notice.
IMPORTANT!
If the crossed-out wheeled bin
symbol is affixed to this machine, it signifies that this
machine is compliant with the EU directives as well as
other similar end-of-life legislation in effect after August
13, 2005. Therefore, it must be collected separately after
its use is completed and cannot be disposed as unsorted
municipal waste.
The user is responsible for delivering the machine to the
appropriate collection facility, as specified by your local
code.
For additional information regarding applicable local
disposal laws, please contact the municipal waste facility
and/or local authorized Taylor distributor.