SETTING DAILY ALRAMS
Move the
ALARM
switch to the
ON
position and the LCD displays
the icon. Move the
ALARM
switch to the
OFF
position and the
disappears.
While in set mode, press
MODE
once and the time will switch to
the alarm time display for 5 seconds. Within these 5 seconds,
press and hold
MODE
for 2 seconds until the hour of the alarm
time starts to flash. Press
UP
or
DOWN
to set the desired hour.
Press
MODE
to confirm your setting and the minutes of the alarm
time display starts to flash. Press
UP
or
DOWN
to set the desired
minute. Press
MODE
to confirm and end setting procedures.
NOTE:
After 20 seconds without pressing any buttons, the clock
automatically switches from alarm setting mode to normal clock
mode.
The alarm will sound for 2 minutes if it is not deactivated by
pressing any buttons. In this event, the alarm will be repeated
automatically after 24 hours.
While the alarm is ringing, press any button except
SNOOZE
to
stop the alarm. It is not necessary to reactivate the alarm. It
automatically sets to the preset alarm time.
While the alarm is ringing press
SNOOZE
to go into snooze mode.
The alarm will sound again in 8 minutes.
°F |°C TEMPERATURE DISPLAYS
The temperature is displayed either in °F / °C, the weather
station defaults to Celsius. Press the
UP
button to switch
between Celsius and Fahrenheit.
