7
6
The accuracy of the results depends on how you stand on the scale.
See diagram below
.
1.
Select your desired measurement unit. Your scale is set to default to pounds at the factory
but you can switch the measurements to kilograms or stones by pressing the “
kg st lb
”
button, located on the bottom of your scale.
2.
Place the scale on a hard, flat surface. Carpeted or uneven floors may affect accuracy.
3.
Before first use, after battery replacement, or if the scale has been moved or bumped, press
firmly on the scale platform. The scale will turn on and automatically turn off. Your scale is
now ready for use. At all other times step straight onto the scale.
4.
Step onto the scale and stand still while your weight is being measured.
5.
The display will flash digits and then your weight. The scale will beep and the display will
flash when the weight is locked. The scale will hold the display with the weight showing.
6.
The scale turns off automatically after use.
Place scale with installed
battries on a hard flat
surface
Press on the platform to
turn the scale on and then
allow it to turn off
Step evenly on to the scale
and your weight will be
displayed
Weighing-Only Operation
Body Composition Estimating Operation
IMPORTANT NOTICE TO USERS
•
This scale has two personal memory numbers (P1-P2).
•
Before starting, you must save your height, age, gender, normal/athlete mode option and
activity level.
•
When finished your results will be estimated and saved.
•
Important! Once your personal data is entered you only need to change if something
needs to be updated: for example, your age.
Feet centered on platform
Feet not centered on platform
