CLOCK SETTING
The clock display is located in the center of the LCD screen.
1. Press and hold the “SET” button on the back of the
weather station for 2 seconds to enter Clock Setting
Mode. “12 Hr” or “24 Hr”
flashes.
2. Press the “+” button on the back of the
weather station to toggle between 12 or 24 hour clock mode. Press
“SET” to confirm. The hour digits
flash.
3. Press the “+” button to change the hours. Press “SET” to confirm. The minute digits
flash.
4. Press th
e “+” button to change the minutes. Press “SET” to confirm. The clock is set.
Notes:
If no buttons are pressed within one minute, the unit will automatically exit Clock Setting mode.
The digits can only advance. If you pass the number you want, continue
to press “+” to cycle through the
numbers again.
Press and hold down the “+” button to advance the digits quickly.
MAXIMUM/MINIMUM TEMPERATURE READINGS
The weather station will store the last recorded high and low temperatures over a 24 hour period. The 24 hour
period starts when the unit is powered up.
•
Press the
“
” button on the front of the unit once to display the highest (maximum) temperature and
humidity readings of the day at that unit’s location. “MAX” will show on the LCD.
•
Press the
“
” button a second time to display the lowest (minimum) temperature and humidity readings
of the day at that location. “MIN” will show on the LCD.
•
Press the
“
” button a third time to return to the current temperature and hum
idity readings at that
location, or the display will automatically return to current readings after 5 seconds.
To clear the maximum and minimum readings: In MAX or MIN mode, press
and hold the “
”
button for 2
seconds to clear that memory. The temperature and humidity displays show dashes (
“
--
”
) and the unit will
begin to track new MAX and MIN readings. All memories will also reset when the unit
’
s batteries are removed.
COMFORT LEVEL
The effects of indoor temperature and humidity are combined to determine an Indoor Comfort level, which
appears as a gauge at the top of the LCD screen. The level is rated between DRY, COMFORT, and WET. The
color gauge is an easy way to visually assess the
room’s current condition, spanning from red for dry, green for
ideal, and purple for wet.
DRY: Contain inadequate moisture
COMFORT: Comfortable level, ideal range for both temperature & humidity
WET: Contain excess moisture
PRECAUTIONS
1. The unit is intended for indoor use only. It is not sealed against moisture and could be damaged if used
outdoors.
2. Do not immerse the unit in water. If you spill liquid on it, dry immediately with a soft, lint-free cloth.
3. Do not clean the unit with abrasive or corrosive materials. This may scratch plastic parts and corrode
electronic circuits.
4. Do not subject the unit to excessive force, shock, dust, temperature or humidity. This may result in
malfunction, shorter electronic life span, damaged batteries or distorted parts.
5. Do not tamper with the unit's internal components. Doing so will invalidate the warranty on this product
and may cause damage. Other than replacing the batteries, the unit contains no user-serviceable parts.
6. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-
mh, etc.) batteries. Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if
the unit will not be used for a long period of time.
7. This product is for measuring room temperatures only. DO NOT PLACE UNIT INTO OVENS, GRILLS, FREEZERS
or MICROWAVE OVENS.
