Step 3: Feeding the Fabric Top onto the Frame
Unpack the top itself and lay it out upside down on a clean flat surface. Locate
the sewn-in identification label – it should be facing up and to the rear edge of
the top. Take the Center on the left side A Bow and slide into the rear sewn
pocket on the top – slide all the way onto the center until it reaches the ABow.
Slide the Center on the C Bow through the smaller middle sewn pocket on the
top (three Bow Tops Only) and the Center on the left B Bow through the sewn
pocket just above the window section at the front of the top
From the other side of the top, secure the Right Side A-B-C Bow assembly to
the Center Bows – using the #8 Screws as in Step 2. This will complete the
fabric to the frame assembly.
3