14
800-628-5188
Rev: 10.13.21
Taylor Made
®
Manual Bimini
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004206
Fig.35
B.
Place the fabric’s front zipper pockets over the
secondary bow
(Fig.35A)
. Zip the pockets closed
(Fig.35B)
.
NOTE:
If necessary, loosen the adjustable front support
tubes to reposition the secondary bow assembly so the
canopy’s front zippered pockets will fit over the front bow.
C.
Place the two inner zippered pockets
(Fig.36A)
over each of the swivel arm bows. Zip the pockets
closed
(Fig.36B)
.
Fig.36
D.
Locate the female snap caps on the left and right sides
of the canopy fabric
(Fig.37A)
.
Fig.37
B
A
A
B
B
A
I.
Pull down on the fabric until the snap caps align with
the snap studs mounted on each of the primary and
secondary swivel arms
(Fig.38A)
.
II.
Snap the female snap caps onto the male
snap studs.
A
primary bow
assembly
secondary bow
assembly
front
rear
4.
Make final adjustments to the canopy to remove any
folds or sagging in the fabric.
A.
Press in on the height adjustment snap button on each
of the adjustable front support tubes while pulling down on
the secondary bow assembly.
B.
When the canopy fabric becomes taught, smooth and
no sagging, make sure each adjustable front support
tube’s height adjustment snap button engages the closest
adjustment hole that will keep the canopy fabric taught.
NOTE:
The left and port right adjustable front support
tubes’ height adjustment position does
NOT
need to be the
same for both supports.
Fig.38
