Taylor-Dunn SC-100-24, Service And Replacement Parts Manual

Page: 17 / 126

Service/Maintenance Guidelines
Page 17
MA-100-03
SC-100
Preventative Maintenance Schedule
MAINTENANCE
LEVEL
HOUR
INTERVAL
1
MAINTENANCE TO BE PERFORMED
2,3
1 500
Inspect the brake system including the park brake and
mounting hardware.
Inspect the steering system, tighten the steering shaft
coupler on the steering gear input shaft.
Lubricate the vehicle, check for leaks.
Inspect safety interlocks.
Inspect front and rear wheel bearings.
Inspect and adjust fork collar bearings (3-wheel trucks
only).
Inspect and tighten all nuts and bolts. First 500 hours
and then every 1000 hours.
2 1000
Inspect and tighten all nuts and bolts.
Clean and repack front wheel bearings.
Inspect and tighten all wire connections.
Inspect the motor brushes and commutator.
Inspect the king pin bushings.
Check front end alignment.
3 2000
Change oil in the drive and rear axle.
Flush hydraulic brake system.
Inspect suspension bushings.
Replace brake pedal/treadle return spring.
Inspect frame for damage.