Taylor-Dunn ET 3000, Manual

Page: 193 / 216

Illustrated Parts
Page 49
MB-T48-02
T-48 AC / ET 3000
* - Use 94-422-21 Heat sink paste on base of controller and controller base
Speed Control Panel
Item No. Part No. Description Qty
1 73-005-01 Motion alarm 1
2 62-400-40 Motor speed control, 48 volt 1
62-400-05 Motor speed control, 72 volt 1
3 89-080-16 8mm x 1.25 x 16mm Hex bolt 5
89-060-17 8mm Lock washer 5
4 02-425-17 Controller base, 1/4 plate 1
02-425-18 Mounting panel 1
5 79-844-20 Circuit breaker, Main 200A (48 volt system) used up to serial number 173064 1
79-829-10 Fuse, Main,325A (48 volt system) used starting serial number 173065 1
79-829-06 Fuse, Main 355A (72 volt system) 1
6 78-307-25 Resistor (included with harness), 48 volt 2
78-3001-00 Resistor (included with harness), 72 volt 1
7 73-004-20 Horn 1
8 88-838-06 #14 x 1/2 Screw 4
9 79-840-20 Circuit breaker, 12-volt 20A 1
10 79-840-00 Circuit breaker, B- 10A 1
11 71-300-02 Line contactor, 48 volt 1
71-300-01 Bracket for 71-300-02 1
71-210-12 Line contactor, 72 volt 1
71-210-11 Bracket for 71-210-12 1
12 79-840-20 Circuit breaker, B+ 20A 1
13 88-818-06 #8 x 1/2 Screw 10
14 88-060-14 1/4 X 1-1/2 NC HEX HD SCR 4
88-069-81 Hex nut 4
88-068-61 1/4 SAE Flat washer 4
15 96-650-02 Clip 2
16 71-120-30 Brake bypass switch 1
71-120-32 Bracket, Brake bypass switch, 72 volt only 1
Not shown
75-442-64 Support, Harness connector 1
73-012-30 DC-DC converter, 48 volt 1
73-012-35 DC-DC converter, 72 volt 1
92-202-23 Bracket, resistor, 72 volt only 1
79-840-30 Standoff, fuse, used starting serial number 173065 2