Page 19
Operator Manual
MB-280-02
Seat Interlock Switch
A switch located under the driver’s seat disables the power to
the vehicle when the driver leaves the seat. The driver must be
seated for the vehicle to operate. Whenever the driver leaves
the vehicle, the driver should turn the key-switch off, place the
forward-off-reverse switch in the center “OFF” position, and
set the park brake.
Park Brake
The parking brake is actuated with a hand lever, which
is located to the right of the driver. To set the parking
brake, push down on the brake pedal and pull the lever
up until it locks. To release the park brake, depress the
foot brake pedal, pull up on the park brake handle, push
the release button, and lower the handle.
Charger Interlock
The charger interlock is designed to disable the vehicle from being driven while the AC charger
cord is plugged into a functioning power source.
The seat interlock switch is only one part of the vehicle safety system. The interlock
switch should not be relied upon as the only safety feature used to disable or disengage
this vehicle. Doing so could result in unexpected movement of the vehicle causing severe
bodily injury and/or property damage.
WARNING
Summary of Contents for BT-280 Series
Page 55: ...Index 55...
