Page 17
Operator Manual
MB-280-02
Vehicle Controls
7) Horn Switch
Depress the switch to sound the horn.
6) Smart View Display
The gauge on the dash has many functions.
Detailed operation is provided later in this
chapter.
DASH
3) Strobe Light Switch
(Optional): Push the top of the switch to turn
the light on. Push the bottom of the switch to
turn the light off.
2) Wiper Switch
(Optional): Push the top of the switch to turn
the wiper on. Push the bottom of the switch to
turn the wiper off.
1) Headlight Switch
Push the top of the switch to turn the lights
on. Push the bottom of the switch to turn the
lights off.
Note: Your vehicle may not include all switches identified. Some of the switches in photo are
optional.
Unless in an emergency, do not activate the
Emergency Stop Switch while the vehicle
is in motion. This vehicle is equipped
with an automatic electric parking brake.
Activating the Emergency Stop Switch
will immediately apply the brake and
abruptly stop the vehicle. This may result
in injury to the occupants and/or upsetting
the load being carried or towed.
CAUTION
5) Hi-Low Speed Switch
Push the top of the switch (rabbit) for normal
speed, push the bottom of the switch (turtle)
for slow speed.
8) Start Switch
The switch turns on the vehicle electrical control
system. Rotate the switch clockwise to turn the
vehicle system “ON” and counterclockwise to
turn the vehicle system “OFF”.
The switch should be in the “OFF” position
whenever the operator leaves the driver’s seat.
This switch is designed to secure and disable
the vehicle. The key can only be removed when
the switch is in the “OFF” position.
9) Emergency Stop Switch
The emergency stop switch will immediately and
abruptly stop the vehicle.
4: Direction Control Switch
This switch determines the direction of travel.
The switch has three positions:
•
FORWARD
: Push the top of the switch all
the way in to travel forward.
•
REVERSE
: Push the bottom of the switch
all the way in to travel reverse.
•
OFF
: There is a center position between
forward and reverse, this is the “direction”
OFF position. The direction OFF position
does
NOT
turn the vehicle control system
OFF. Use the Start switch to turn the
vehicle control system OFF. Refer to Start
Switch in this section for details regarding
turning the vehicle control system OFF.
Note: The OFF position IS NOT neutral and
does NOT disconnect the motor from
the drive train.
Summary of Contents for BT-280 Series
Page 55: ...Index 55...
