3
How does my Taylex Wastewater
Treatment System work?
All household wastewater from your bathrooms, toilets, kitchen, and
laundry naturally flows into your Taylex Wastewater Treatment
System
using
gravity.
Step One
The first stop for your household wastewater is in the ‘Primary Chamber’.
Here solids will naturally sink to the bottom and fats and oils will naturally
float to the top, leaving a clearer “Supernatant Zone” in the middle. This
zone will transfer to the next stage of treatment.
Step Two
Next is the ‘Secondary Chamber’. Further settling happens here. Again,
water from the middle flows onto the next stage. In a traditional Septic
System, this is where the journey would end and effluent would now be
pumped onto your property and into our environment, relying on sand or
soil to do the rest. With a Taylex Wastewater Treatment System, there are
still four more steps to produce clean, clear, safe water for your yard. If
you have an ABS-NR there is an additional Bio Block in this chamber, that
encourages further separation of solids.
Step Three
The ‘Aeration Chamber’ is next up. This is where the magic happens. Your
quiet, reliable, energy-efficient Nitto Blower sends oxygen into the chamber
in the form of tiny bubbles. These bubbles pass through a specially designed
structure called “Bio-Mass”. Bio Mass is purpose designed to trap the air
bubbles to feed naturally occurring ‘Aerobic bacteria’. These microscopic
Eco-Warriors are now hard at work, chomping through most of the
remaining organic matter, polishing the water, and eliminating odour.
