GALLERY SHIELD W/ D FEET, LAMINATE W/ ACRYLIC
Tools & Hardware Needed
8540-1217
8540-1170
Drill
Robertson # 2
Tape Measure
#8 X 2" Flat Head
Screws
1/4 -20 X 1/4 SS
Screw (4X)
1
7
1
5
2
7
5
5
7
3
8
4
5
7
6
8
1.
Assemble the “D” feet to
laminate . Please refer to
page 19. Follow
Steps 1 to 3
on how to install them.
2.
Check frameless blade
extrusion if there is a Xmas
tree clip on both ends.
3.
Position the frameless blade
extrusion to the middle of
top trim.
4.
Securely fasten frameless
blade extrusion to laminate
,using #8 X 2” Flat Head Self
Drilling Screws . .
5.
Install glass/acrylic with plastic
gasket into the frameless
blade extrusion .
6.
Align and secure the glass/
acrylic by inserting 1/4-20 X
1/4” Socket Set Screw
through each of the holes on
the side of the frameless blade
extrusion using allen key
driver.
7.
Tighten gently each side until
the glass/acrylic is centered
and secured.
Note:
Do not overtighten.
Check the frameless blade
extrusion if it is straight.
Overtightening set screws will
bend the Frameless Blade
Extrusion outward and end
caps will not fit.
8.
Insert the end cap on both
ends of the frameless blade
extrusion then push it down to
secure.
“D” FEET
LAMINATE
FRAMELESS BLADE EXTRUSION
X-MAS TREE
#8 X 2” FLAT HEAD SCREW
GLASS/ACRYLIC WITH PLASTIC GASKET
1/4-20 X 1/4” SOCKET SET SCREW
END CAP
1
2
3
4
1
2
3
4
5
6
3
2
5
6
7
8
7
3
8
3
3
November 2022
the shield collection 23
