8
USING THE APPLIANCE
The appliance will only function if all parts have been properly assembled
and the lid has been properly locked in place with the clamps (See Fig.
B).
1. Wash the fruit and/or vegetables and cut them into pieces that fit
into the feeding tube.
2. Make sure the juice jug has been placed under the spout.
3. Turn the control knob to speed setting I (high speed) or II (normal
speed) to switch on the appliance.
Speed II is especially suitable for soft fruits and
vegetables such as watermelons, grapes, tomatoes,
cucumbers and raspberries.
Speed I is suitable for all kinds of fruits and vegetables.
4. Put the pre-cut pieces in the feeding tube and gently press them
down towards the rotating filter with the pusher.
5. Do not exert too much pressure on the pusher, as this could affect
the quality of the end result and it could even cause the filter to come
to a halt.
6. Never insert your fingers or other object into the feeding tube. Only use
the pusher for this purpose.
7. After you have processed all ingredients and the juice flow has stopped,
switch off the appliance and wait until the filter has stopped rotating.
