Tayama FTK-002 Operating Instructions Manual Download Page 4

Notice for use

.The electric kettle must be placed on a flat, dry surface when boiling
water.
.The electric kettle can only be used for boiling water, please do not use
it to make coffee, milk, tea and other drinks.
.When boiling water, the quantity of water should not be higher than the
maximum scale. If the water is too full, the boiling water may be ejected.
.The kettle must be supervised and placed beyond the reach of the
child to avoid scalding.
.During boiling water process, please do not open the lid to avoid
scalding by boiling steam.
.If there is no water in the kettle, please do not run it, or otherwise the
stainless-steel base will be discolored, dry burning for times will make
the service life of the kettle decreases sharply.
.In the process of boiling water, it is normal for the kettle getting
hot.When taking and pouring the boiling water, must pull out the power
plug and hold the handle to lift the kettle. .When not in use, please pull
out the plug.

Product characteristics

This product is designed for convenient carrying by customer during
tourism.

It can be used in AC220-240V 50HZ power supply and AC100-120V
50/60HZ power supply (Operate according to the method of use)

4

Summary of Contents for FTK-002









Reviews: