25
K
J
H
G
F
E
D
C
B
A
Codes on the battery status display
Message
Action required
A. The battery needs charging.
The lifter is shut down and needs charging. Switch it back on
and lower the tool to a safe level. Charge immediately.
B. There is a bad connection to the
motor.
Check all connections.
C. The motor has a short circuit to a bat-
tery connection.
Contact a TAWI authorised service technician.
D. N/A
E. N/A
F. Sleepmode (follows a preset period of
inactivity, the function is there to save
the battery).
Restart the lifter.
G. Throttle fault.
Make sure the throttle is in rest position before the lifter is
started.
H. Controller fault.
Make sure all controller connections are secure.
J. N/A
K. An excessive voltage has been applied
to the control.
Often caused by a poor battery connection. Check the battery
connections.
