TAVRIDA ELECTRIC ISM15_LD_1 Series, Application Manual

Page: 14 / 70

14
2
Scope of delivery for the CM:
CM Screwdriver Routine test certificate
Figure 14
The intactness of the devices should be checked visually for:
· Mechanical damage, scratches, discolouration, corrosion
· Damage to the seals (Figure 19, Figure 20)
Any transport damage must be reported immediately to the carrier in writing.
Cases of damage must be photographically documented.
Rating Plates, Warranty Seals
Please check that the rating plates of the delivered devices correspond to the data of the order. The rating plate
for the ISM contains the following information (Figure 15):
1. Manufacturer
2. Type of device
3. Rated maximum voltage
4. Rated impulse withstand voltage
5. Rated dielectric withstand voltage
6. Rated frequency
7. Single capacitor bank breaking current
8. Cable charging breaking current
9. Year manufactured
1
2
3
4
5
6
9
10
Figure 15
Rating plate
7
8
11
12
13
14
15
16
17
18
10. Rated operating sequence
11. Applicable ANSI standards
12. Rated continuous current
13. Rated short circuit current
14. DC component percentage
15. Rated short time current
16. Interrupting time
17. Pole centre distance
18. Weight