Electrical Safety Instructions
(Applicable to UK Installations only)
All fittings must be installed by a competent person, in accordance with current IEE wiring regulations. If in doubt consult a qualified electrician
Important
Always switch off the electrical supply at the mains during installation and maintenance. It is recommended that the fuse is withdrawn or the circuit
breaker is switched off for the necessary circuit before installation commences.
Fitting in Bathrooms is subject to the appropriate zone in accordance with IEE Regulations. This product is suitable for zone 2 and outside zones. IT
IS NOT suitable for installation in Zone 0 or Zone 1. It is also not suitable for installation in saunas, steam rooms or shower cubicles. This product is
only suitable for permanent installation. DO NOT connect to a trailing plug and socket outlet. Although this product has an Ingress Protection rating of
IP44 it is only suitable for indoor use. Do not attach the product to surfaces that are damp or otherwise electrically conductive.
Installation safety and care
DO NOT strike glass components with hard or pointed items. DO NOT place very hot or very cold items against or in close proximity to glass surfaces
unless an adequately thick insulation material is used to prevent such items coming in contact with the glass. The nominal thickness of the mirror glass
used in this product is 5mm and is film backed for safety. If the glass becomes chipped or broken replace immediately.
This product should be positioned well away from curtains and other fabrics. Never cover the mirror. This product is heated, we recommend that it is
turned off after use and should never be left on for prolonged periods of time
This product could be dangerous and is only to be installed by a competent person.
Cleaning
It is recommended that the unit is cleaned with a soft, dry, non abrasive cloth when turned off. Never use cleaning agents or abrasive materials on any
type of surface finish. Do not allow moisture to come into contact with the electrical components.
TRANSMIT ILLUMINATED MIRROR
Product Code: SLE510
Installation & care instructions
Please retain for future reference
Tavistock, Brassmill Lane Trading Estate, Bath, BA1 3JF
T. 01225 787870 | F. 01225 448877 | E. [email protected] | W. www.tavistock-bathrooms.co.uk
Ref: MB.05.13 | V.1.00
Compliance
This product complies with all relevant British and European safety standards:-
Wiring
This product is manufactured to class I category and must have an earth connection.
Colour Coding:
L - Live = Brown
N - Neutral
= Blue
- Earth
= Green & Yellow
Lights
1 x 12v DC LED Light Strip
To obtain replacement led strips if faulty or broken contact customer services
(see details at foot of page)
EN 55015:2001; BS EN 60598-1: 2004, AMD:2001, AMD:2003; BS EN
60598-2-1: 1989. EN 60529: 1992 & A1, A2, A3.
Distances from a bath tub or shower tray
2
2
2
2
OUTSIDE
ZONES
ZONE
2
ZONE
1
0.75m
0.6m
m
6
.
0
0.6m
0.75m
BATHROOM ZONES DIAGRAM
