PAGE 4
Page 4
Page 5
PAGE 5
The Resonate mirror comes with LED lighting and a heated demister pad, which are
controlled via a touch sensor located on the front face of the product. The product
can be controlled as detailed below:
Operating Instructions
Installation Procedure
Important:
Before starting the installation process, make sure the electrical supply
is switched off. It is recommended that the fuse is withdrawn or the circuit breaker
is switched off for the necessary circuit.
Important:
Before starting the installation process, ensure the wall construction is
suitable and can support the weight of the mirror.
Note:
The wall plugs supplied are suitable for solid stone / brick walls. For any
other wall material use specialist wall plugs.
1)
Measure the distance (X) between the keyhole slots on the back of the mirror.
2)
Mark out the fixing screw positions on the wall using a pencil to the desired
height, ensuring they are spaced at distance (X).
3)
Drill the marked out positions and fit the wall plugs accordingly. Fix the screw into
position, leaving a small amount of the screw head proud of the wall for hanging.
4) Make the electrical connection from the mirror to the mains supply. Use the
connection wire found at the rear of the mirror to make the necessary connections in
accordance with the current IEE regulations. A second person will need to hold the
mirror in place whilst electrical connections are made.
5)
The mirror should easily slide onto the fixing screws and secure into place.
NOTE: To secure the mirror further, a small amount of silicone sealant can be applied
to the side of the extrusions to prevent the mirror being accidently pulled away from
the wall.
To remove the mirror, the mirror should first be lifted and then pulled away from the
wall.
Installation Procedure
Turn Mirror ON/OFF
To turn the product on/off, press
the button.
Mains Supply
Distance X
Wall Screws
Wall plugs
(2)
(3)
(4)
(5)