Taurus X71, Assembly And Operating Instructions Manual

Page: 14 / 40

14
X71
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order
to open the file.
+ The assembly can also be found as a video under the following link:
https://www.sport-tiedje.co.uk/taurus-elliptical-cross-trainer-x7.1-tf-
x7.1#product-assembly . To go directly to the assembly video, you can
alternatively scan the QR code. (The video shows the X7.1, which assembly
is identical to the X7.1-2)
Step 1: Unpacking
1. Cut the box with a a box cutter along the dotted line.
2. Remove the box.
3. Carefully remove all parts from the box and check for damaged or missing parts.
L
NOTICE
If damaged parts are found or parts are missing: contact your dealer immediately.
4. Remove the tools first. Remove only the parts for each step as needed.