background image

6

After Sales Support

EMAIL: [email protected]

TEL: 1300 922 271

8. 

Never use or charge batteries if you suspect that the 
last time they were charged was more than 12 months 
previously.

 There is a high probability that the battery 

pack has already suffered dangerous damage (exhaustive 
discharge).

9.  Charging batteries at a temperature below 10°C will cause 

chemical damage to the cell and may cause a fire.

10.  Do not use batteries which have heated during the 

charging process, as the battery cells may have suffered 
dangerous damage.

11.  Do not use batteries which have suffered curvature 

or deformation during the charging process or which 
show other non-typical symptoms (gassing, hissing, 
cracking,…)

12.  Never fully discharge the battery pack (recommended 

depth of discharge max. 80%) A complete discharge of 
the battery pack will lead to premature ageing of the 
battery cells.

13.  Never charge the batteries unsupervised.

Protection from environmental influences

1.  Wear suitable work clothes. Wear safety goggles.

2.  Protect your cordless tool and the battery charger from 

moisture and rain. Moisture and rain can cause dangerous 
cell damage.

3.  Do not use the cordless tool or the battery charger near 

vapors and inflammable liquids.

4.  Use the battery charger and cordless tools only in dry 

conditions and an ambient temperature of 10–40°C.

5.  Do not keep the battery charger in places where the 

temperature is liable to reach over 40°C. In particular, do 
not leave the battery charger in a car that is parked in 
the sun.

6. 

Protect batteries from overheating. 

Overloads, over-charging and exposure to direct sunlight 
will result in overheating and cell damage. Never charge 
or work with batteries which have been overheated – 
replace them immediately if possible.

7. 

Storage of batteries, battery chargers and cordless 
tools. 

Store the charger and your cordless tool only in 

dry places with an ambient temperature of 10-40°C. 
Store your lithium-ion battery pack in a cool, dry place at 
a temperature of 10-20°C. Protect them from humidity 
and direct sunlight. Only place fully charged batteries in 
storage (charged at least 40%).

8.  Prevent the lithium-ion battery pack from freezing. 

Battery packs which were stored below 0°C for more 
than 60 minutes must be disposed of. 9. When handling 
batteries beware of electrostatic charge: Electrostatic 

discharges cause damage of the electronic protection 
system and the battery cells. Avoid electrostatic charging 
and never touch the battery poles.

Disposal of batteries

Batteries contain substances harmful to the environment. 

Never place batteries in your household refuse, in fire or in 

water. Batteries should be collected, recycled or disposed of 

in an environmentally friendly way. Seek advice on correct 

disposal from local waste authorities. 

When shipping or disposing of batteries and cordless tools, 

always ensure that they are packed individually in plastic 

bags to prevent short circuits and fires.
Do not lose this safety information.

Summary of Contents for TITANIUM TT-CD 18 Li





















Reviews: