Taurus TF-RK3459, Assembly And Operating Instructions Manual

Page: 13 / 28

11
2
19
17
19 10
5
4
19 17
7
16
11
16
1
13
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
Step 1: Assembly of the Upright Supports and Joint Tubes
1. Attach the end caps (10 & 11) to the right and left upright support (1 & 2).
2. Insert the left joint tube (5) into the right joint tube (4) and secure with one fast pin (14).
3. Attach the right joint tube (4) to the right upright support (1) along with two reinforcement
plates (7) with four bolts (16), four washers (10) and four lock nuts (19).
4. Attach the left joint tube (5) to the left upright support (2) along with two reinforcement plates
(7) with four bolts (16), four washers (10) and four lock nuts (19).