13
12
3
7
13
Step 2:
Use of Barbell Bar and Handle Bar
L
NOTICE
+
The shown barbell bar is not included in the scope of delivery and must be purchased
separately.
+
The roll sleeve mounted on the base frame can be used with 30 mm and 50 mm barbell bars.
+
The handle bar can be used only with 50 mm barbell bars.
Barbell Bar
Slide the barbell bar into the opening of the roll sleeve (3).
⚠
CAUTION
If you use a 30 mm barbell bar, you have to tighten the plum blossom screw (7) to lock the
barbell bar into place.
Handle Bar
1. Attach the handle bar (12) to the barbell bar and secure it with one screw bolt (13).
2. To remove the handle bar (12), first loosen the screw bolt (13) and then remove the handle bar
(12) from the barbell bar.
Summary of Contents for TF-QT1032
