Taurus TF-MS, Assembly And Operating Instructions Manual

Page: 28 / 60

28
Multi Smith
Step 8: Assembly of the smith barbell fixture
1. Push the sliding sleeve (14), the bottom frame (1), the safety hook (12) and the rubber cushions
(18) onto the guide rod (15).
2. Insert the guide rod into the intended seat of the front upright frame (2).
3. Secure the guide rod to the upper plate (6) with a bolt (38) and a washer (46).
4. Repeat these steps for the other side.
5. Push the bar (16) through the smith barbell (17) and through the sliding sleeve (14) and into the
seat of the barbell sleeve (13).
6. Attach the bar (16) with a bolt (40) and a washer (46).
7. Place the end cap (50) on the barbell sleeve (13).
8. Slide the spring collar (48) onto the barbell sleeve (13).
9. Repeat these steps for the other side.