-When the room temperature is higher than
the selected temperature, the heater will stop
heating.
PROGRAM SELECTION:
-Press (3) to select the program desired.
-Press (4) or (5) to select running mode and
press (3) to confirm.
-Free
-Daily
-Weekly
PROGRAM SETTING:
FREE PROGRAM:
-Chose the desired temperature using the but-
tons (4) and (5) and wait until the indicator stops
flashing.
-
Press (3) continuously until the shows on
screen.
-Press (4) or (5) to select the timer length in 30
minutes incremets. Maximum 24 hours.
-- The time programmed or remaining time will
appear on the display.
- Press continuously (3) to exit timer mode,
until the disappeared.
DAILY PROGRAM:
-Chose the desired temperature using the but-
tons (4) and (5) and wait until the indicator stops
flashing.
-Select the appliance mode desired.
-Confort and
-Economic and
-Defrost , program content displayed empty.
-Select temperature for each working mode:
-Press continuously (3) until shows on screen.
-Pres (4) or (5) to sed your comfort temperature
desired.
-Pres (3) to confirm and the shows on screen.
-Pres (4) or (5) to sed your economic temperatu-
re desired.
-Select the desired program (2).
-Press continuously (3) to enter program setting
until
shows on screen.
-Time segment to be programmed flashes.
-Press (3) to select the mode desired , or
.
-Press (4) or (5) to move to the next or previous
time segment.
-Repeat the operation until set the 24 hours with
the desired mode.
WEEKLY PROGRAM:
-Select weekly program .
-Press continuously (2) until (II) and (III) flashes.
-
-Select the desired program
with (4) or
(5) for the day that flashes.
-Once selected the program press the button (2)
-Repeat the operation until you complete the
schedule for every day of the week.
-Press (3) to complete the weekly program
settings.
SAFETY LOCK:
-The buttons will be locked after one minute
without press any button.
-
Will appear on the screen.
-Press (4) and (5) at same time to unlock
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
-Turn the appliance off using the on/off button.
-Turn the appliance off, using the on/off switch.
-Unplug the appliance from the mains.
-Clean the appliance.
SAFETY THERMAL PROTECTOR:
-The appliance has a safety device, which pro-
tects the appliance from overheating.
-When the appliance switches itself on and off
repeatedly, for reasons other than the ther-
mostat control, check to ensure that there are
no obstacles that impede correct air entry or
expulsion.
-If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
