SH-8 as a preamp
SH-8 as a power amplifier
Precautions
Amplifier produces high volume levels. Staying in places of high volume
levels could cause permanent hearing loss.
Do not use the amplifier in humid and dusty places.
Do not operate the amplifier through the unearthed socket.
Do not leave the amplifier in the vicinity of children.
Do not use the amplifier with broken power outlet or improper power cord.
Do not install nor use the amplifier near any heat sources, in case of
overheating the amplifier turns off
Do not cover the vent holes!
In order to ensure proper air circulation, do not block any of the ventilation
openings.
Never put any liquid containers near the amplifier.
In case of any objects or liquid access inside the amplifier, urgently switch
the apparatus off and unplug the power supply cord.
Protect the amplifier from any strikes.
ATTENTION: To reduce the risk of electrical shock, do not remove the
back cover of the amplifier. Inside parts can be repaired only by qualified
service personnel.
WARNING: To prevent the risk of electrical shock do not expose this
appliance to moisture, rain or any liquid.
and will return to work after cooling the
unit.
If you want to use the amplifier's power stage alone and connect another
preamp to it, you can do so by connecting the output of the external preamp to
the RETURN (rear 4) jack. The preamp section of the SH-8 will then be
disconnected and the signal from the external preamp will be sent to the power
amplifier.
The SH-8 Qube can also be used as a preamp alone, connected to an external
PA system or mixer via the LINE-OUT, without speaker connection necessity. If
a speaker wire is not connected to the amp's speaker OUT the amp's power
stage is inactive.
