Taurus Single Pulley Design Line TF-PULL-SINGLE, Assembly And Operating Instructions Manual

Page: 34 / 52

34
Single Pulley
Step 15
1. Remove one pulley (18) each from the two pulley housings (13). To do this, loosen the two bolts
(34) and the two nuts (46).
2. Guide the ball end of the cable (26) through the two pulleys (18) located in the right pulley
housing (13).
3. Assemble the pulley (18) in the right pulley housing (13) again with the previously loosened
bolt (34) and nut (46).
4. Loosen the bolt (32) and the nut (46) of the double pulley block (9).
5. Guide the cable (26) up to the A4 pulley in the double pulley block (9), up to the A5 pulley in the
main frame (1) and then up to the A6 pulley.
6. Attach the bolt (32) and nut (46) to the double pulley block (9).
7. Guide the cable (26) through the two pulleys (18) in the left pulley housing (13) and then
reattach the pulley (18) to the left pulley housing (13) with the bolt (34) and nut (46).