Taurus SEBR7132, Assembly And Operating Instructions Manual

Page: 13 / 56

13
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
Step 1: Connecting Main Frame and Bottom Tube
Mount the two parts of the main frame (1) and the barbell cups (3) to the two bottom tubes (2)
on each side using four M12*90 hexagon bolts (50), eight Φ12 washers (54) and four M12 safety
nuts (53).
L
NOTICE
The assembly step is the same for both sides.