Taurus SEATED LEG CURL IT95, Owner'S Manual

Page: 21 / 38

STEP 3
1. Attach one 4.5" Pulleys (#13) to the Weight Stack Frame ASSY (#1) using:
one M10*50 SHCS (#117)
two Φ11*Φ20*2 Flat Washer (#128)
one M10 Nylon Lock Nut (#125)
2. Attach the Top Bracket ASSY (#21) and two Bottom Bracket ASSY (#22) to the Weight
Stack Frame ASSY (#1) using:
two M8*20 SHCS (#121)
two Φ9*Φ16*1.6 Flat Washer (#129)
two M10*75 SHCS (#116)
four Φ11*Φ20*2 Flat Washer (#128)
two M10 Nylon Lock Nut (#125)
3. Attach the Wheel Frame ASSY (#8) and the Swing Frame ASSY (#7) to the Front Support
Frame ASSY (#4) using:
two Cap Φ60 (#101)
two Circle Ring Φ62.5*5 (#102)
two M10*25 SHCS (#119)
4. Attach the Thigh Frame ASSY (#6) to the Front Support Frame ASSY (#4) using:
one Circlips For Shaft (#111)
one Cap ASSY (#131)
one M10*25 SHCS (#119)
5. Attach the FOAM Frame (#5) to the Swing Frame ASSY (#7) using:
one Shaft(#130)
two Cap ASSY (#131)
two M10*25 SHCS (#119)
Note: 1. Wrench Tighten Bolts and Nylon Lock Nuts.
2. Pay attention to the relative location between the Wheel Frame ASSY
(#8) and the Swing Frame ASSY (#7).
Assembly
21