Taurus rowzer plus Manual Download Page 20

IF ANY ANOMALY IS DETECTED, CHECK THE FOLLOWING TABLE

ANOMALY

REPAIR

It does not start

Check that it is connected to the mains.

Check that the main switch is in the “ON” position

It does not detect the jar

Check that the jar is properly positioned and has correctly reached 90º 

from the start Check that the jar lid has been fitted.

Check that no left-over frozen food is hindering the positioning of the jar.

Check remains of frost in the ice cream glass. 

The appliance returns to start without 

processing the frozen food

The device is protected by restarting possible overvoltages in the network 

or electrostatic discharges. In this case, re-establish the process that was 

being carried out.

The appliance takes a very long time to 

make the first portion

Frozen food very soft or a temperature over -18ºC that the appliance 

cannot detect.

The jar opens during processing of the 

frozen food

Check that the jar lid has been fitted. Check that the blade is correctly 

positioned.

Strong noise when processing ice 

cream

The blade may have fallen due to poor positioning. Stop the appliance 

quickly. If the blade or shaft of the machine has been damaged, consult 

an authorized service center.

ERROR 1. MOTOR DOES NOT WORK

The blade motor does not work. Allow the appliance to cool down in 

case of overheating. In case of persisting the error, go to a specialized 

technical service

ERROR 2. MOTOR OVERLOAD

The capacity of the device has been exceeded. Check the ice cream that 

is being processed and its presents an excess of freezing. In case of 

persisting the error, go to a specialized technical service

ERROR 3. MOTOR AXLE / BLADE

The axis of the device has been locked. Check the condition of the 

blade, check the ice cream to be processed and this error may appear 

when processing frozen water. In case of persisting the error, go to a 

specialized technical service

ERROR 4. MOTOR OVERLOAD

Motor blade blocked. Check hardness of the ice cream and the condition 

of the blade.

Manual ROWZER PLUS 2018.indd   21

15/11/18   9:54

Summary of Contents for rowzer plus























Reviews: