Taurus Multi-Gym WS5, Assembly And Operating Instructions Manual

Page: 20 / 76

WS5 20
Step 6
1. Mount the seat cushion support (A20) to the base frame (1) with one bolt set (96).
2. Insert the cushion support (22) into the seat cushion support (A20) and secure the connection
with the fast pin (86).
3. Mount the seat cushion support (A20) and the joint plate (42) to the front upright frame (8) with
two bolt sets (99).
4. Mount the buffer (84) to the seat cushion support (A20) with a screw (104).
5. Mount the leg extension (21) to the cushion support (A20) with one bolt set (105).
6. Shove the foam roller (88) over the ends of the leg extenstion (21) and secure them with one
plug (89) on each side.
7. Mount the back cushion support (A24) to the front upright frame (8) with one bolt set (150).
8. Mount both cable arms (A14) to the cable arm assemble (A13), place the axle collars (15) on
both cable arms (A14) and secure each with two bolts (106).
9. Tighten all bolts with the tool.