Taurus MINI FOOD, Manual

Page: 14 / 65

switch.
-The pilot light (D) comes on.
- Select the appliance function desired.
- Work with the food you want to process.
- Once the water has boiled the appliance will
switch off automatically.
Once you have finished using the appliance:
- Stop the appliance by releasing the on/off
switch.
- Unplug the appliance from the mains.
Chopping:
- Put the food to be prepared in the chopping
container and attach the cover firmly.
-Turn the appliance on using the on/off switch
- Stop the appliance when the food reaches
the desired texture.
Accessories:
Spatula:
-Useful to remove the food from the jar
Cleaning
- Disconnect the appliance from the mains
and allow it to cool before undertaking any
cleaning task.
- Clean the equipment with a damp cloth with
a few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
- Never submerge the appliance in water
or any other liquid or place it under running
water.
How to deal with lime scale incrustations:
- For the appliance to work correctly it should
be kept free of limescale or magnesium
incrustations caused by the use of hard water.
- To prevent this kind of problem, we
recommend the use of water with low lime or
magnesium mineralisation.
- However, if it is not possible to use the kind
of water recommended above, you should
periodically remove the limescale from the
appliance:
- Every 6 weeks if the water is “very hard”.
- Every 12 weeks if the water is “hard”.
- To do so, we recommend the use of the
specific product Taurus Decal, which can be
found in specialised shops and authorised
technical services.
- A specific anti-lime scale product should be
used on this kind of product.
- Homemade solutions are not recommended
in the decaling of this appliance, such as the
use of vinegar.
Anomalies and repair
- Take the appliance to an authorised
technical support service if problems arise.
Do not try to dismantle or repair without
assistance, as this may be dangerous.
- If the connection to the mains has been
damaged, it must be replaced and you should
proceed as you would in the case of damage.
For EU product versions and/or in case
that it is requested in your country: