background image

9

1.3 

 Set-Up  Place 

 

WARNING 

 

+

Do not place the equipment in main corridors or escape routes.

 

CAUTION 

 

+

Choose a location in which to place the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.

 

+

The training room should be well ventilated during training and not be exposed to any 
draughts.

 

+

 Choose the place in which to set up the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment.

 

+

The free area in the direction from which the exercise equipment is accessed must be at 
least 0.6 m larger than the exercise area.

 

+

 The set-up and mounting surface of the equipment should be fl at, loadable and solid.

 

+

If your device is to be mounted on the wall/ceiling, make sure that you use the appropriate 
assembly material to avoid possible damages or personal injuries.  The contractual partner 
accepts no liability for this.

  ATTENTION

 

+

The device may only be used in one building, in suffi

  ciently tempered and dry rooms 

(ambient temperatures between 10°C and 35°C). The equipment should not be used 
outdoors or in rooms with high humidity (over 70%) like swimming pools.

 

+

A fl oor protective mat/equipment underlay can help to protect high-quality fl oor coverings 
(parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight 
unevenness.

 

+

For Class S and I equipment, the exercise equipment may only be used in areas where 
access, supervision and control are specifi cally regulated by the owner.

Summary of Contents for Iso Low Row Sterling









































Reviews: